Skip to content
Pre-orders open November 24 · Launch December 1. Launch orders: expected postal delivery December 1–5.

Free US shipping, no minimum. We ship free next business day*.*Starts 12/1.

Care guides / Guide 1

How to Catch a Queen Ant & Nuptial Flights

When queens fly, how to spot a mated one, and two ways to catch her: a test tube with cotton, or a Scout with a Catch Cap.

What a nuptial flight is

Each year, mature colonies send out winged males and winged young queens. Colonies of the same species across a whole area tend to fly on the same day. The queens mate, often in the air, and come back down within hours. The males die soon after.

Each mated queen then breaks off her wings and looks for a place to dig in and start a colony, usually on her own. That wingless new queen, walking on the ground, is the one to catch. A healthy one can raise a whole colony from nothing.

When and where to look

Flights happen from early spring to late fall, depending on the species and your region. Most follow the same kind of weather: a warm, humid, calm day, often just after rain. Some species fly in the morning, many in the late afternoon or evening, and some at night, when queens gather under porch lights and street lights.

A few common US flights, as a rough guide:

  • Winter ants (Prenolepis): early spring, on the first warm days
  • Carpenter ants (Camponotus): spring to early summer
  • Pavement ants (Tetramorium): late spring and summer
  • Cornfield ants and other Lasius: late-summer afternoons after rain
  • Harvester ants (Pogonomyrmex) in the Southwest: after the summer monsoon rains

Timing shifts by weeks from south to north and from year to year. Local antkeeping groups usually post when flights start near you.

Look on open, hard ground: sidewalks, driveways, parking lots and curbs, along the base of walls, and under lights. Queens stand out on bare pavement, and they walk along edges looking for cracks to dig into.

Spotting a mated queen

A queen is much bigger than the workers of her species, with a bulky thorax (the middle section), where her wing muscles are.

Clues she has mated:

  • Her wings are gone or coming off. Small stubs or scars on the sides of the thorax show where they were.
  • She is on her own, walking quickly and with purpose, probing cracks and edges.

Wing loss is a strong clue, not proof. Most mated queens shed their wings soon after landing, but some keep them for a while, and now and then an unmated queen sheds hers. A winged queen may simply not have mated yet, so most keepers look for wingless ones. The surest sign is eggs in the weeks that follow.

Males are the small, slim, winged ones with tiny heads and big eyes. They don't start colonies.

What to bring

  • A few prepared test tubes, or a Scout set up with a Catch Cap (both below)
  • A soft paintbrush, a leaf or a folded card for steering a queen
  • A small box or bag to keep catches dark and out of the sun
  • A pen or labels for the date, the place and your best guess at the species

Catching with a Scout? Its 16 mm tube is included; prepare it with cotton and add a Catch Cap if you want a catching funnel. The Catch Kit is optional spare gear and includes another tube.

Method 1: A test tube and cotton

This is how most keepers start a queen, and it suits almost any species. Make a few tubes before flight season so they're ready. Common 16, 18 and 20 mm tubes all work as founding homes. Scouts directly accept 16 mm only; the straight adapter for other tubes is paused.

  • Fill a clean test tube about a third full of water. Bottled spring water or filtered water is best.
  • Push a cotton ball in and down onto the water so it soaks through with no air gap. Pack it firmly enough that no water leaks out when you tip the tube.
  • Wipe away any drops in the dry part of the tube. That dry space is the queen's room.
  • To catch, set the open end in front of her and let her walk in, or steer her gently with a soft brush or a leaf. Many queens head straight into a dark tube.
  • Close the open end with a second, dry cotton ball, pushed in just far enough to stay put. It lets air in and keeps her in.
  • Label the tube with the date and place.

Keep one queen per tube, unless you know your species starts colonies in groups.

Method 2: A Scout with a Catch Cap

Both Scouts are small founding nests. V1 has a classic queen chamber beside the water; V2 has a roofed Queen Pocket opening onto its drinking Spring. Catching gear is optional; the water tube is included.

Set it up before you head out:

  • Fill the included 16 mm tube with water and plug it firmly with cotton, as in Method 1.
  • Push the tube gently into the glass-safe seat until its flat stop. Guide ribs center it without squeezing it; never force glass.
  • Slide the Click Stop lid closed until it clicks.
  • Fit the Catch Cap in a port. Close every other port before catching.
  • Use the matching Cover where available, or keep the nest in a dark, ventilated box.

To catch, hold the Scout low and set the Catch Cap's wide mouth right in her path. Its funnel narrows from about ⅝ in to about ¼ in, so it's easy to walk into. Steer her toward it with a soft brush or a leaf if she wanders.

Once she's inside, pull out the Catch Cap and fit a Port Plug. Scout V1 includes one; check V2's current box list and choose closures separately if needed. Set the Scout somewhere dark and quiet.

After the catch: the founding months

Keep her somewhere dark, quiet and at a steady room temperature, about 70–80 °F. A drawer or a closed box works well. Keep her out of direct sun and away from spots that swing between hot and cold.

Most common species start their colonies without food. The queen lives off her body reserves and raises her first workers alone, so don't feed her or open her tube. Frequent disturbance is a common reason founding queens eat their eggs.

A few species need small meals while founding. Myrmica queens, for example, forage for food. Look up your species if you're not sure.

Check on her no more than once every week or two, briefly and with a dim light. Eggs usually appear within a few days to two weeks. The first workers, small ones called nanitics, usually take one to two months at room temperature, sometimes longer.

Caught her in late summer or fall? Queens of many species from places with cold winters may not raise workers until after a winter rest. The heating guide explains how to give one.

Once workers are out, offer small meals every few days: a drop of sugar water or honey and a tiny piece of insect. Remove anything uneaten within a day.

If a test tube's cotton dries out, or mold spreads toward the queen, move her to a fresh tube. Pull out the dry cotton plug, set the open end of a fresh tube against the old one and tape them together. Cover the new tube to keep it dark and leave the old one in the light. She will usually move across with her brood on her own.

In a Scout, keep an eye on the water line. When it runs low, or the colony outgrows the Scout, Link it to a Founder. The moving guide shows how.

Collect responsibly

  • Keep species that are native where you live, and never release a colony somewhere new.
  • Moving live ants across state lines can require a USDA permit, and some states have their own rules. Check before you travel with a queen.
  • Leave fire ants alone. Red imported fire ants sting, and moving them out of quarantine areas is restricted.
  • Ask before collecting on private land, and don't collect in national parks or anywhere else it isn't allowed.
  • Take only what you can raise. Two or three queens of one species is plenty, since not every queen succeeds.

ColonyLog · Free ant colony tracker

Turn what you learn into a colony record.

Record a feeding, a water check or a new milestone in ColonyLog. Dated notes and photos make it easier to look back at what changed as your colony grew.

See how ColonyLog works